Optical audio connectors are a fantastic way to enhance the audio quality of movies and television programs. Your TV speakers won’t cut it when it comes to improved sound. Therefore, attaching your TV to a soundbar or home theatre system is ideal. How to connect speakers to tv with optical cable? There are a few ways to accomplish this, but if your hardware supports optical audio connections, this can be an excellent method for connecting everything. While connecting your equipment using optical audio is pretty simple, there are a few pitfalls to be aware of. To connect an optical audio cable to your TV, home theatre system, cable box, or soundbar, refer to this guide.
Installing an Optical Cable
How to connect speakers to tv with optical cable? The fundamental procedures are the same whether you’re connecting your TV to a soundbar or home theatre system. The source does not have to be a TV; you can also use optical audio to link a Blu-ray player, DVD player, or cable box to a sound system.
Remember that an optical output is required by your TV, Blu-ray player, or cable box. A soundbar, home theatre, or amplifier with an optical audio input will be the devices you use to connect these. However, if you adhere to these straightforward instructions, connecting an optical cable is simple: Verify the protective cap is present on the optical output connector.
When not in use, specific optical ports feature a protective cap.
Pull out one of these if your TV has one. In case you decide to cease using the optical connection in the future, store it someplace secure. How to connect speakers to tv with optical cable? Other TVs could only feature a protective door that slides aside when you insert the cable. The protective cap must also be removed if you connect a cable box or DVD player.
Locate the optical input connection on your soundbar or home theatre amplifier.
How to connect speakers to tv with optical cable? Check to see if your soundbar or amplifier’s optical input has a plastic plug, much like your TV. If so, get rid of it. If not, it should be simple for you to connect the cable.
Connect your TV or cable box to the optical audio cable.
Remove any protective caps that specific cables may have before connecting them. One end of your optical audio cable should be connected to the TV’s optical output on the back. Just make sure the connector on the cable matches the geometry of the connection on your device. How to connect speakers to tv with optical cable? An optical port only plugs in when everything is lined up properly due to its architecture. Avoid pushing it. It will effortlessly snap into place when you line it the right way.
Attach the optical audio cable to your soundbar or amplifier.
From the TV or cable box to your amplifier or soundbar, run the optical cable. Put the cable into the optical audio input on the back of your home theatre system. The label should be noted in this example AV1 and AV4 because there may be more than one.
- You can choose the appropriate audio source, later on, thanks to this.
- Once more, please match up the connector on the cable with the port’s form because it will only fit one way.
- Try to keep it from getting tangled up with other system wires.
Start your cable box or television.
How to connect speakers to tv with optical cable? Ensure the audio output is set to “digital out” in the TV’s audio settings. On some models, the optical output could function even if it is not turned on in the audio menu. Disabling the TV speaker in the audio menu is typically a smart move. The optical port on a cable box is frequently activated, but if there is no sound, check the box’s audio menu to determine if the digital output must be turned on.
Is an Optical or HDMI connection for your soundbar preferable?
How to connect speakers to tv with optical cable? Using a soundbar with an HDMI connection is usually recommended if you have a choice. This is mainly because HDMI connections provide a more comprehensive range of audio formats and because HDMI CEC commands let you manage your devices. An optical connection is sufficient if you only require stereo audio or Dolby Digital and DTS 5.1 surround sound.