- What to Look for When Purchasing Best Studio Monitors for Edm
- Woofer Size
- Front-Ported vs. Rear-Ported
- Comparison Table:
- JBL 305P MkII
- KRK ROKIT 5 G3
- Yamaha HS8
- KRK ROKIT 8
- ADAM Audio A7X
- Frequently Answered Questions
- How should Studio Monitors be selected?
- Do I need studio monitors to mix EDM/electronic music?
- How do electronic music monitors differ from other types of music monitors?
Music studios use studio monitors as specialized speakers. The audio engineer uses these speakers to hear the sound. Studio monitors aim to reproduce sound with as much accuracy as possible without adding additional ‘color.’
You’ll need the best studio monitors for edm if you’re a music producer. Regular speakers may not reproduce the sound coming from the DAW as clearly and have areas of the spectrum that are too loud or too quiet. best studio monitors for edm reproduce every frequency at its proper volume with flat response (covering the whole spectrum). Sound design, mixing, and mastering will be more accessible with this flat response.
What to Look for When Purchasing Best Studio Monitors for Edm
Choosing best studio monitors for edm requires you to consider the following factors:Size of the loudspeaker
- Amount of power
- The types of connections
- Ported vs. rear-ported
Best studio monitors for edm are most commonly available in 5-inch and 8-inch sizes, but some companies offer larger, smaller, and in-between sizes. The larger the monitor woofer, the better the speaker will reproduce bass sounds. Professional and advanced producers should use speakers with an 8-inch diameter. Beginners can start with 5-inch speakers but will eventually need 8-inch studio monitors.
The best studio monitors for edm contain power amplifiers that deliver sound to the speakers. It is common for studio monitors to be bi-amped, but they can also be single- or tri-amped. Speakers are affected by the amount of power delivered to them, especially regarding reproducing transients. You may lose detail in the transient if you mix loudly on low-powered speakers. You want the power ratings of bi- and tri-amplified studio monitors to be as high as possible to ensure that both highs and lows are reproduced accurately.
On every monitor, you have two connection options when hooking up your monitors to an audio interface: XLR or TRS (14″). Monitors planning connections will be necessary if you intend to connect to RCA devices.
Front-Ported vs. Rear-Ported
This speaker hole allows air to enter and exit the enclosure freely. Air movement increases bass volume, enables the speaker to reach lower frequencies, and reduces distortion at the low end.
The direction of the port can affect the sound depending on where the monitors are located. The sound air won’t be able to move as freely between the inside and outside of rear-ported speakers if placed near a wall. You shouldn’t place monitors near walls or corners because the sound will reflect off the walls.
Last update on 2023-09-25 / Affiliate links / Images from Amazon Product Advertising API
JBL 305P MkII
The monitors on the JBL 305P MkII don’t look very impressive so people might judge it quickly. Their glossy finish gives them an outdated look, but the sound they produce is anything but.Compared to the previous model with a plastic enclosure, the MkII series features a new enclosure material. In addition to reducing resonance, the upgraded enclosure improves response.One of the most surprising features of these monitors is their power. What is interesting about these monitors is that JBL used the same amp power for both HF and LF drivers. You can adjust the volume using the level controls on the back of the highs seem too loud at times. The transient response is fantastic for this price range because of the extra power in the highs.
- A wide sweet spot
- You can easily adjust the highs if they are too loud at times
KRK ROKIT 5 G3
KRK ROKIT 5 G3 has been a popular monitor for almost a decade.The third generation is a significant improvement compared to the previous versions.If you’re looking for some monitors to do some casual listening or DJing on, then the ROKIT series is a wise choice. Digitally boosted bass makes listening enjoyable.
- The Price is reasonable
- A variety of connection options are available
- Uneven frequency response
Yamaha’s HS series studio monitors were designed to bring back the classic NS-10 sound. There was a saying that if your track sounded right on the NS-10, it would sound good on any sound system if it sounded good on the NS-10.Yamaha’s HS8 monitor has 120 Watts of power (75 Watts LF, 45 Watts HF) and is one of the most potent mid-level monitors on the market. The HS8 is much more powerful than its closest competitor, the KRK ROKIT 8.There is a crispness to the highs, clarity to the mids, and punch to the bass. On these speakers, the frequency response is excellent.
- The sound quality is excellent
- This is a reasonable price
- There is none
KRK ROKIT 8
The Price of these speakers is one of their biggest strengths. Mid-range studio monitors typically cost $300 each, but depending on the supplier, you’ll find them for around $250.It can sound a bit ‘boomy’ at times. To increase the low end of the sound you hear, ROKITs modify the signal. They’re great for casual listening but can be challenging to use as reference monitors.
- The Price is very reasonable
- Connection options are varied
- Uneven frequency response
ADAM Audio A7X
You’ll hear “pleasurable” repeatedly when describing any ADAM Audio studio monitor. The X-ART ribbon tweeter produces a cleaner high end compared to dome tweeters. X-ART tweeters also reduce ear fatigue, so users can work longer without feeling tired.Its front power button is one of my favorite features. Only one monitor on this list has a front power button so you might have noticed that. Whenever I want to turn on my monitors or workstation, I have to reach or walk around my desk.
- The power button on the front
- High-end response with crispness
Frequently Answered Questions
How should Studio Monitors be selected?
Although monitors aren’t built with a specific genre in mind, you want accurate bass response when purchasing monitors for EDM music. This is because electronic music, in general, is dominated by bass.
Do I need studio monitors to mix EDM/electronic music?
It is possible to try, but your output will suffer. You need a reliable pair of monitors if you are serious about music production. It cannot be avoided. The only way to hear the intricate details of your sound is with monitors, which will give you an accurate representation of your sound. Studio monitors are better than mixing stock speakers in a laptop or computer.
How do electronic music monitors differ from other types of music monitors?
Monitors are universally helpful. It’s always a wise idea to get equipment that will work for all purposes unless that particular equipment category has different types for different uses. In contrast, studio monitors aren’t like that, so if you get a high-end pair, you should be able to use them for everything.
You can see that the highest variance is found in the Wattage (4) and Sound Quality (2.5) categories. In the Price to the Performance category, the Rokit 5 G4 is tied with the Yamaha HS8. However, it fails to meet the standards set by the Yamaha HS8 and the Adam A7X in the other categories. However, the Rokit 5 G4 still manages to compete with its rivals in the Frequency response category, finishing second with an 8.5. The primary battle here is between the Adam A7X and the Yamaha HS8, as they are almost indistinguishable.