Best Amp For Klipsch RP-600m

lifter search for the best amp for Klipsch RP-600M? Worry not, as we have listed the best ones in this article.

Klipsch speakers are known to be the best of the best in music and sound. And they deserve that fame, which is why many people prefer them over any other brand. However, for all their quality and the long list of specifications, they are still speakers and need some support in the form of accessories. And those accessories come in the form of receivers, and most importantly, the amplifier.

The receivers, on their own, cannot provide that sheer amount of power the speaker will need. Hence, buying an amplifier is a necessity to make sure that the speaker will give their best.

Best Powered Speakers Under 500 Dollars 

Compact line array vs regular pa speakers ultimate comparison

But before you take out your wallet and head to the market, you need to know what you have to look for.

Buyers Guide/ What You Need To Look For the Best Amp For Klipsch Rp-600m:

What do you need to know about what makes an amplifier the best? Keep reading to find out.

Best Amp For Klipsch rp-8000f

Supported Stations:

The first thing that you need to check in the best amp for klipsch rp-600m is the total number of stations supported by the amplifier. This is one of those vital points that make or break the deal. When buying an amplifier, the first question you should ask is how many signals it can catch. You should only go for an amplifier that can capture or support as many stations as possible at the end of the day. Nowadays, there are amplifiers that support up to a whopping 40 FM and AM stations. Nice!

Power:

Today, energy efficiency is the route to go for. The same applies here, no matter your usage.

There are some amplifiers available that will go into standby mode when left unused for a couple of minutes. There are also some that come with the sleep mode feature for long hours. The standby and sleep mode features help a lot in decreasing your energy consumption. These are energy-efficient amplifiers that help to save a lot of power. As a responsible owner, you should opt for such products without any hesitation.

Design:

Design is another important factor you should be concerned about if you do a complicated design with lots of extra bulk and unneeded features. You would have trouble setting them up. Even the operation will be a bit difficult. But if you choose a simple design, you are shaving down the extra doohickeys. Simply put, a simply designed amplifier will be easy to set up. Even operating it would also become a lot easier.

Size:

The bigger, the better does not apply here. All a gigantic amplifier does is make your life difficult. But a smaller amplifier is much better in terms of efficiency. Its simple design helps in the operation. It is also easier to set it up. A smaller-sized amplifier would deliver you quality, efficiency, and ease of use, unlike the bigger ones, so there is no need to make your life difficult over the bigger size.

Impedance Level:

Keep in mind that the impedance level of the amplifier must be the same as the speaker. For example, if your Klipsch speaker runs at 8 ohms, the amplifier should also run at 8 ohms, not at 16 or more ohms.

Preference:

Your preference also matters. Some people prefer a sound setup that sounds like a live concert in an enclosed space (room). In the end, what you like matters most.

Price:

Finally, after deciding on features and your choice, you should not forget to consider your budget. Pricier ones have more features, while low-priced ones have fewer. Sometimes, you will get an amplifier in the low price range with features of high-priced ones. Essentially, what it boils down to is what you need, what you want, and what you can afford.

Now that you know what to look for in an amplifier, let’s move on to the list of best amps for Klipsch RP-600M.

Best Amplifier For Klipsch Speakers

Comparison Table

No products found.

Best Amp For Klipsch RP-600M:

1. Cambridge Audio CXA61 Stereo Two-Channel Amplifier:

Starting with a bang, we have the Cambridge Audio CXA61 amplifier. There are many reasons why this product is at the top of the list of best amp for Klipsch RP-600M. It has a beautiful body, smooth design, and unmatched sound integrity. In short, this is one of those amplifiers you don’t want to miss out on.

Best USB audio interface under 500 dollars

Specs:

• Brand: Cambridge Audio
• Dimensions (L x W x H): 16.9 x 13.4 x 4.5 inches
• Weight: 18.3 Pounds
• Connectivity Technology: RCA, Bluetooth, USB
• Color: Lunar Grey
• Output Wattage: 60 Watts
• Compatible Devices: Speaker, Smartphone, Tablet, Personal Computer
• Control Method: Remote
• Number of Channels: 2
• Audio Output Type: Headphones, Speakers
• Analog RCA Inputs: 4
• Coaxial Digital Inputs: 1
• Coaxial Inputs: 1
• AUX Front Input: 3.5mm
• Optical Digital Inputs: 2
• Speaker Sets: 2
• Speaker Sets FILTER: x 2
• Power Output: 60 x 2
• Power Output – Watts per CH: 60 – 99
• Frequency Response (Hz): 5 – 60,000
• High-Resolution Audio: Yes
• Power Consumption – Normal Use: 600 W
• Power Consumption – Standby: 0.5 W

Key Features:

• Control Method: Remote
• Frequency Response (Hz): 5 – 60,000
• Speaker Sets FILTER: x 2

2. NAD – D 3045 Hybrid Digital DAC/Amplifier:

Coming up next is the famous NAD – D 3045 Hybrid Digital amplifier. Not only does it have a unique look and design, but it also has a lot of features that will make anyone salivate over it. The Bluetooth connectivity makes it extremely easy to stream your music anywhere you want. To summarize, this deserves to be at the top of the list of best amp for Klipsch RP-600M.

Specs:

• Brand: NAD Electronics
• Dimensions (L x W x H): 10.44 x 2.81 x 9.31 inches
• Weight: 7 pounds
• 2 x 60W Hybrid Digital Amplifier
• Two-Way Bluetooth powered by Qualcomm aptX HD audio
• Asynchronous USB 24/192 Input supporting MQA and DSD
• HDMI Audio Return Channel
• Coax and Optical Input
• MM Phono and Line Input
• Preamp Out | Sub Out
• Headphone Amp
• IR Remote
• 60 watts x 2 into 8 ohms (20-20,000 Hz) at 0.03% THD
• THD (20Hz – 20kHz): <0.005% (at 1W, 4 and 8 ohms)
• Signal-to-Noise Ratio: >98dB (A-weighted, 500mV input, ref. 2.828V out in 4 Ohms)
• Frequency response: ±0.3dB (20Hz – 20kHz)
• Channel separation: >75dB (1kHz), >70dB (10kHz)
• Input sensitivity: 260mV (for 30W in 4 Ohms)
• Asynchronous Type-B USB input for audio up to 24-bit/384kHz
• 2 x Toslink optical input, 1 x coax input, 1 x RCA input
• Built-in headphone amp with 3.5mm mini-jack

Key Features:

• Two-way aptX HD Bluetooth for streaming and connecting wireless headphones
• Compact, low-profile design that can be set up vertically or horizontally
• 2 x Toslink optical input, 1 x coax input, 1 x RCA input

3. Rockville BluTube SG 70W Tube Amplifier:

Another good choice will be the Rockville BluTube SG 70W Tube Amplifier. This one deserves to be on the list of best amp for Klipsch RP-600M due to its many superior qualities. The luxurious and beautiful finish gives off a superior look, and the features like Bluetooth connectivity and many more makes it one of the best amplifier for Klipsch RP-600M.

Specs:

• Brand: Rockville
• Dimensions (L x W x H): 10.6 x 10.2 x 5.1 inches
• Weight: 4.61 pounds
• Connectivity Technology: Bluetooth, USB
• Compatible Devices: Speaker
• Audio Output Type: Headphones, Speakers
• Format: WAV, WMA
• 25 watts x 2 RMS @ 8 ohm
• 35 watts x 2 RMS @ 4 ohm
• Frequency Response (±3dB): 22Hz-20kHz
• Input Impedance: 47kO
• Input Sensitivity: 300mV
• Output Impendence: 4-8ohm
• Total Harmonic Distortion(THD): ≤0.02%
• Signal-to-Noise Ratio(S/N): ≥86dB
• Bluetooth: 2.1+EDR
• USB: Supports WAV/MP3/WMA/APE/FLAC
• Built-in Bluetooth with 33-foot range
• Built-in Preamplifier
• Headphone output
• VU meter
• Adjustable bass and treble (2 band equalizer)
• USB input for music files from the USB thumb drive
• Rear Speaker Terminals: Banana plug / binding post outputs for 2 speakers
• Optical input
• Coaxial input
• Sub output

Key Features:

• Rockville BluTube SG Audiophile-grade tube amplifier with Bluetooth
• Adjustable bass and treble (2 band equalizer)
• USB input for music files from the USB thumb drive

4. Yamaha A-S301BL Natural Sound Integrated Stereo Amplifier:

Next up on the list of best amp for Klipsch RP-600M is the Yamaha A-S301BL. It is an unusual choice, as it is a bit of school technology. In other words, by today’s standards, the technology is obsolete by at least 20 years. It is just a powerful amplifier attached to the speaker. But it is powerful, and its analog control makes it a perfect choice for vinyl lovers, so if you need a simple amplifier, then this is the one for you.

Specs:

• Brand: Yamaha Audio
• Dimensions (L x W x H): 17.13 x 15.25 x 6 inches
• Weight: 8 pounds
• Speaker Type: Subwoofer
• Amplifier Type: Integrated Amplifier (Preamp/Power Amp Combo)
• Channels: 2
• Mounting Type: Floor Standing
• Color: Black
• AC Input Power: 120 VAC, 60 Hz
• Power Consumption: Active: 190 W, Maximum: 430 W, Standby: 0.5 W
• Frequency Response: 20 Hz to 20 kHz ±0.5 dB (Pure Direct Mode), 10 Hz to 100 kHz ±1 dB
• Residual Output Noise: 40 µV (IHF-A)
• Tone Control: Bass (20 Hz): ±10.0 dB, Treble (20 kHz): ±10.0 dB
• Damping Factor: ≥ 210 (8 Ohms, 1 kHz)
• Power Output per Channel: 70 W at 6 Ohms / 20 Hz to 20 kHz / 0.038% THD (RMS), 60 W at 8 Ohms / 20 Hz to 20 kHz / 0.019% THD (RMS)
• Dynamic Power per Channel: 100 W at 8 Ohms, 120 W at 6 Ohms, 140 W at 4 Ohms, 150 W at 2 Ohms

Key Features:

• ART (Anti-Resonance and Tough) Base
• Digital audio inputs for TV or Blu-ray player
• ToP-ART (Total Purity Audio Reproduction Technology)

5. NAD – D 3020 v2 Hybrid Digital Integrated Amplifier:

The next entry on the list of best amps for Klipsch RP-600M is another amplifier from the NAD. As always, they have outdone themselves by putting forward the best possible product. The NAD – D 3020 v2 Hybrid Digital Integrated Amplifier is one of its kind, as it comes with a lot of integrated features that will make your head spin.

Specs:

• Brand: NAD ELECTRONICS
• Dimensions (L x W x H): 8.6 x 7.4 x 2.3 inches
• Weight: 3.05 pounds
• Standby Power: ≤0.5 Watts
• Supports bit rate/sample rate: up to 24/192 (via Digital Audio input)
• 2 x 30W @ 0.01% THD, >100W Dynamic Power @ 4 Ohms
• aptX Bluetooth music streaming
• MM Phono input for Vinyl
• Optical and Coaxial Digital inputs
• Line Inputs
• Subwoofer Output
• Bass EQ setting
• Separate Headphone Amplifier
• Wireless Remote

Key Features:

• TV Connect learns TV remote Commands
• Bluetooth wireless connectivity for streaming music from compatible smartphones, tablets, and computers
• warranty: 2 years

6. Sony STR-DN1080 7.2-ch Surround Sound Home Theater AV Receiver:

Do you want an amplifier and receiver for Klipsch RP-600M? Good. After all, why limit yourself when you can get two products in one?

Technically, Sony STR-DN1080 deserves to be at the top of the list of best amp for Klipsch RP-600. But as it is not strictly an amplifier, it got bumped down. However, that does not mean it is in any way less than the previous entries. It is, in fact, capable of going toe to toe with the best of the best and emerging as a victor on the top. It is because Sony has always produced the best of the best, so you will get what you were promised.

Specs:

• Brand: Sony
• Dimensions (L x W x H): 19 x 15 x 8.38 inches
• Weight: 23 pounds
• Connectivity Technology: Built-in WiFi
• Color: Black
• Power Requirement: 120V 60Hz
• Output Wattage: 165 Watts
• Compatible Devices: Speaker
• Control Method: Remote
• Number of Channels: 2
• Total HDMI Ports: 6
• 4K HDR and HDCP 2.2 compatibility
• Bluetooth Receiver
• Bluetooth Transmitter
• NFC
• WiFi
• AirPlay

Key Features:

• voice control powered by Google Home
• Mobile Control Application
• Wireless Multi-Room
• Chromecast built-in

7. Denon AVR-S540BT Receiver:

It’s impossible to leave Denon products when talking about the best amp for Klipsch RP-600M.

Like the previous entry, this is also an A/V receiver, so that it will be both a receiver and amplifier for your speaker. Like all their products, this is also a superior choice and affordable. It provides you with a stunning home theatre experience that you will fall in love with immediately.

Specs:

• Brand: Denon
• Dimensions (L x W x H): 56 x 17.09 x 5.94 inches
• Weight: 16.8 Pounds
• Connectivity Technology: Bluetooth
• Color: Black
• Supported Internet Services: Pandora, TIDAL, Spotify
• Output Wattage: 140 Watts
• Compatible Devices: Television, Smartphone, Speaker, Personal Computer
• Control Method: App
• Number of Channels: 5
• Input sen­si­tiv­ity/Input im­ped­ance: 200 mV/47 kΩ/ohms
• Power consumption in CEC standby mode: 0.5 W
• Power consumption when Bluetooth standby is used: 1 W
• Fre­quency re­sponse: 10 Hz – 100 kHz — +1, –3 dB (Di­rect mode)
• S/N: 98 dB (IHF–A-weighted, Di­rect mode)
• Power supply: AC 120 V, 60 Hz
• Power consumption: 310 W
• Maximum communication range: Approx. 32.8 ft/10 m in line of sight∗
• Frequency band: 2.4 GHz
• Power consumption in standby mode: 0.1 W

Key Features:

• Bluetooth connectivity
• Remote control
• Setup assistant

8. Willsenton R8 KT88/EL34 x4 AMP Power Amplifier Headphone:

We will now take a look at Willsenton R8. The Willsenton R8 is an integrated amplifier, a power amplifier (there is a group power amp input), and a headphones amp. One amplifier can use EL34, KT88, or 6550 tubes, so if you buy 2 more sets of tubes, you can get 3 kinds of sounds.
All parts of the machine are welded with scaffolding. A unique square power transformer should be used for this machine. Two high-quality wideband EI output transformers are used in the output transformer. A 6SN7 is used as a power supply filter for voltage amplification and boost.

Specs:

• Brand: Willsenton R8 KT88/EL34 x4 Tube Integrated AMP Power Amplifier Headphone (Black)
• Color: Black
• Output Wattage: 45 Watts
• Dimensions (L x W x H): 19.69 x 11.81 x 20.08 inches
• Power Source: AC
• Total harmonic distortion: 1% (1kHz)
• Frequency effect: 10Hz 40kHz (+/-0.5db)
• Signal to noise ratio: 91dB
• Input impedance: 100KΩ
• Input sensitivity: 380mv (when Integrated amp input) 820mv (when pure power amp input)
• Output impedance: 4Ω, 8Ω
• Power supply voltage: 230V ± 5% (50Hz) ~ 115V ± 5% (50Hz)
• Use vacuum tube: 6SN7*3.6SL7*2.KT88*4/6550EH*4/EL34*4
• Power consumption: 310W
• Net weight: 26kg

Top Picks:

Cambridge Audio CXA61 Stereo Two-Channel Amplifier:

This amplifier will give you uncompromised sound and a lot of freedom with the music.

NAD – D 3045 hybrid digital DAC/Amplifier:

The amplifier has a lot of features that make it worth its price tag.

Rockville BluTube SG 70W Tube Amplifier:

Another superb quality amplifier to pair with your speaker.

Frequently Asked Questions:

Q: What amps go with Klipsch?

Ans: Again, the best amp to pair with any Klipsch speaker will be a tube amp or class A amplifier. Strictly speaking, you have to make sure that the amp is between 10 – 50 watts so that you will get enough power for almost every application.

Q: Do Klipsch speakers need an amp?

Ans: Again, Klipsch speakers are the best, but they still need power and accessories to operate to the best efficiency levels. As receivers cannot provide that sheer power on their own most of the time, the addition of an amp can do wonders.

Q: What should I look in an amplifier?

Ans: When buying an amplifier, you need to look at the following things.

• Supported stations
• Power
• Impedance levels
• Size
• Preference
• Design
• Price

Q: Can the receiver work as an amplifier?

Ans: Technically, yes, there are many receivers that also double as amplifiers. Some are actually quite good at it. However, that does not mean that all receivers will be a good amplifier. So getting an amplifier would still be a better option.

Q: Are NAD amplifiers good?

Ans: Yes, NAD amplifiers are quite good. Not only do they come with fantastic builds and numerous specifications, but they are also affordable. The best thing about these amps is that they have a clear midrange and superior, seamless integration of each element in the overall unit that won everyone over.

Q: How long do stereo amplifiers last?

Ans: Amplifiers are capable of lasting anywhere from 10 to 20 years. They can give more with proper care and maintenance, but that is not recommended. The reason for that is that technology evolves with time, so forget about 20-year-old technology, even a 10-year-old amplifier will become outdated.

Q: Which company amplifier is best?

Ans: NAD Electronics is obviously best. Then there is Cambridge Audio who also gives good-enough products. Other names include Anthem, Rega Research, Parasound, Schiit, Pass Labs, Linear Tube Audio, Yamaha, etc.

Conclusion:

And there you have it, the list of best amp for Klipsch RP-600M. Hopefully, this list will make the decision easy for you. Keep in mind that you have to do your research before you sect one because the more thought you put into it, the better the results will be.

Related Articles:

Best Busking Amp for Guitar and Mic in 2023

Does a Sound Card Make a Difference with Headphones?

How to Record in Stereo with One Mic?